New
Specialized 2022 Stumpjumper Evo Pro
$15,600.00
$15,600.00
The Stumpjumper EVO Pro is a testament to full-gas trail performance. With an all-new design, from its S-Sizing geometry with an adjustable head tube angle, to its 150mm of shred-ready travel, this thing is a full-on ripper. And to top it off, it’s build has been hand-picked to keep overall weight low and stoke high.
Description
- Frame: FACT 11m carbon chassis and rear-end, asymmetrical design, Mixed Wheel Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel
- SWAT: Increased-volume SWAT™ Door integration with 22oz SWAT™ Bladder
- Rear Shock: FOX FLOAT X Factory, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSC adjustment, S1:210x50mm, S2-S6:210x55mm
- Fork: FOX FLOAT 36 Factory, GRIP2 damper, 15x110mm, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel
- Stem: Deity, 35.0mm
- Grips: Deity, Knuckleduster, Black
- Handlebars: Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm, 35.0mm
- Front Brake: SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm
- Rear Brake: SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm
- Shift Levers: SRAM Eagle AXS Rocker Paddle
- Rear Derailleur: SRAM X01 Eagle AXS
- Cassette: SRAM XG-1295 Eagle, 10-52t
- Chain: SRAX X01 Eagle, 12-speed
- Crankset: SRAM X1 Carbon, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm
- Chainrings: Alloy, 30T
- Bottom Bracket: SRAM DUB, BSA 73mm, threaded
- Rims: Roval Traverse Carbon 29, hookless carbon, 30mm inner width, hand-built, 2Bliss Ready
- Front Hub: DT Swiss 350, sealed cartridge bearings, 15x110mm spacing, 28h
- Rear Hub: DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h
- Spokes: DT Competition Race
- Front Tire: Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29×2.3″
- Rear Tire: Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 29×2.3″
- Inner Tubes: Standard, Presta valve
- Saddle: Bridge, 155/143mm, Hollow Ti-rails
- Seat Post: Bike Yoke, Revive Max, 34.9 (S1:120mm, S2/S3:150mm, S4-S6: 185mm)
- Seat Binder: Alloy, 38.6mm
Brand
Specialized
Additional information
| Size | S1, S2, S3, S4, S5, S6 |
|---|---|
| Color | Gloss Sand/Black |
Related Products
